ZLYJ EXTRUDER GEARBOX MANUAL CHAPTER THREE

VII. Fault Analysis and Solutions

Faults

Causes

Solutions

 

Faults

Continue reading

The characteristics and application of dc motor

The characteristics and application of dc motor:

    Main advantages: Compared with AC three-phase asynchronous motor, the characteristics and application of dc motor has good starting characteristics and speed regulation characteristics, the characteristics and application of dc motor ,which is convenient for speed regulation. Therefore, for the production machinery with high starting and speed regulation performance, DC motor drive is often used.The characteristics and application of dc motor main disadvantage: you need to configure the DC power supply, the price is relatively expensive.

The characteristics and application of dc motor:

   1) When the production machine needs to maintain a constant speed under different load conditions and the speed can be adjusted, a DC motor can be used. For example, a shunt DC motor can be used to drive a grinding machine, a planer, and the like.

Continue reading

Contacts

NER GROUP CO.,LIMITED

Mobile Phone: +86-18563806647

Tel: +86-535-6330966 (24×7 message available)

Viber/Line/Whatsapp/Wechat: 008618563806647

Business E-mail:This email address is being protected from spambots. You need JavaScript enabled to view it. (24×7 message available)

Continue reading

ZLYJ EXTRUDER GEARBOX MANUAL CHAPTER TWO

Attention:

      ◇ Cut off and prevent (by a warning tag, etc.) the re-connection of power supply to the motor before installing the couplings.

      ◇ Striking by hammer or other similar tools is not allowed when mounting the couplings and small gears onto the shaft end.

      ◇ Ensure the correct tension of belt when installing belt wheel.

              ◇ Do not install or uninstall the screw by force in respect of the output part.

Continue reading

Main Catalogue Overview

-gearbox-catalog
-gear-reducer-catalog
-inline-gear-motor
-crane-gearmotor-gear-reducer
-cycloidal-gearmotor
-worm-reducer-gearmotor
-electric-motor-factory
-industrial-gearbox-speed-reducer
-flender-gearboxes
-extruder-gearbox-plastic-industry
-gear-reducers
speed-reducer-factory

Customer Reference

Customer Reference

The United States

The United States

Australia

Australia

Bangladesh

Bangladesh

Brazil

Brazil

Myanmar

Myanmar

Canada

Canada

Chile

Chile

Columbia

Columbia

Denmark

Denmark

Egypt

Egypt

England

England

France

France

Germany

Germany

Guatemala

Guatemala

Holland

Holland

India

India

Indonesia

Indonesia

Iran

Iran

Japan

Japan

Kazakhstan

Kazakhstan

Kenya

Kenya

Latvia

Latvia

Macedonia

Macedonia

Malawi

Malawi

Malaysia

Malaysia

Mexico

Mexico

Mongolia

Mongolia

Nicaragua

Nicaragua

Nigeria

Nigeria

Oman

Oman

Pakistan

Pakistan

Panama

Panama

Peru

Peru

Philippines

Philippines

Poland Client

Poland Client

Portuguesa

Portuguesa

Qatar

Qatar

Russia

Russia

Saudi Arabia

Saudi Arabia

Senegal

Senegal

Serbia

Serbia

Singapore

Singapore

South Africa

South Africa

Spain

Spain

Sri Lanka

Sri Lanka

Tanzania

Tanzania

Thailand

Thailand

Turkey

Turkey

Vietnam

Vietnam

Yemen

Yemen

The helical gear advantages and disadvantages

The helical gear advantages and disadvantages is a novel reduction gearing. It has many advantages, such as

Small size and light weight. Thanks to the optimized cash design concept, the weighted average of the performance makes the advantages complement each other. The transmitted torque is increased, the transmission ratio is finely graded, the load carrying capacity is enhanced, the use is durable, and the economy is good.


1. The helical gear advantages and disadvantages
The involute helical gear reducer has the characteristics of small size, light weight, high bearing capacity, high efficiency, long service life, convenient installation, wide motor power range and fine classification of transmission ratio. Can be widely used in equipment that needs to be decelerated in various industries.


2,The helical gear advantages and disadvantages
The helical gear worm reducer adopts the direct connection mode of the motor, and the structure is a first stage helical gear plus a first stage worm gear transmission.move. The helical gear advantages and disadvantages,The output is shaft mounted and comes in six basic mounting styles. It can be reversed and reversed. The helical gear adopts hard tooth surface, stable operation, large carrying capacity, working environment temperature -10 °C ~ 40 °C. The helical gear advantages and disadvantages。This product has the characteristics of large speed variation range, compact structure and convenient installation compared with similar products. Can be widely used in metallurgy, mining, lifting, light industry, chemical, transportation, construction and other mechanical equipment speed reduction mechanism.

The helical gear advantages and disadvantages,gears are one of the most important components in large-scale industrial equipment. A very important application of helical gear spur gear transmission. The helical gear advantages and disadvantages transmission has good meshing performance, which makes the transmission process tend to be stable and the noise is small. It has the advantages of relatively large coincidence degree, relatively low load between teeth, thereby improving the ability of the gear to withstand pressure, and the like. Helical gear transmission has important applications in the field of life and production. The helical gear advantages and disadvantages.Through the understanding of the characteristics and application of the helical gear transmission, we have a deeper understanding of the helical gear transmission and facilitate future use. The helical gear reducer is a novel reduction gearing. It adopts the advanced design concept of the optimized module combination system. The helical gear advantages and disadvantages.It is a helical gear reducer with small size, light weight, large transmission torque, stable starting, fine transmission ratio, and can be connected according to user requirements and various installation positions. The helical gear advantages and disadvantages,and the carrying capacity is strong and durable.

Continue reading

Which of the following is not an advantage of helical gears

which of the following is not an advantage of helical gears.Both high-power gear reducers and low-power gear reducers use helical gears. In some cases, helical gears have an irreplaceable role; let us analyze the characteristics and shortcomings of the lower helical gears:

 which of the following is not an advantage of helical gears. The characteristics of the helical gear: the number of teeth without root cutting is small; the degree of coincidence is large, the load of each pair of gears is reduced, and the bearing capacity of the gear is improved;which of the following is not an advantage of helical gears, the meshing property is good, the transmission is stable, and the noise is small.

  which of the following is not an advantage of helical gears.Disadvantages of the helical gear: compact structure, when the helical gear is cut with a rack-shaped cutter, the number of small teeth without the undercut gear is less than that of the spur gear, so that a more compact structure can be obtained; the degree of coincidence is large, Under the same conditions,which of the following is not an advantage of helical gears, the meshing process of the helical gear is longer than that of the spur gear, that is,which of the following is not an advantage of helical gears, the coincidence degree is large, which reduces the load capacity of each pair of gears, thereby improving the bearing capacity of the gear, prolonging the service life of the gear, and making the transmission smooth. The manufacture of herringbone gears is cumbersome, the manufacturing process is complicated, and the cost.

Continue reading

How to select the gear reducers model correctly?

Selection of general speed reducer includes condition, select the type, determine the specifications and other steps.
In contrast, the type selection is more simple, while providing accurate reducer working conditions, master reducer design, manufacture and use of key common feature is a reasonable choice reducer correct specifications. Specifications choose strength, thermal equilibrium, the shaft extension portion radial load and other conditions to be met.


1. Selecting by mechanical power or torque (strength checking)
The biggest difference is GM reducer and special reducer design selection process is that the former applies to all sectors, but the deceleration only by a particular design of working conditions, so users need to consider the selection of different correction coefficients according to individual requirements plant selection should be based on the actual motor power (not the gear unit rated power) play nameplate; the latter according to the user's special conditions designed to consider factors that, the design has been made generally considered, as long as the selection using a power less than or equal reduction The power rating can be, the method is relatively simple.
2. the heat power balance checking
Universal reducer allowable thermal power values are (under normal ambient temperature of 20 ℃, per hour, 100%, continuous operation, the power efficiency of 100%), the maximum allowed by the lubricant equilibrium temperature (usually 85 specific working conditions ℃) determined. The condition is not at the same time pressing the corresponding coefficient (sometimes integrated into a coefficient) be amended.
3. Checking shaft extension portion bear radial load
Universal reducer often required to input shaft, an output shaft extending middle part withstand the maximum allowed radial load to be limiting and should be checked, the manufacturer shall propose bold and increase the bearing shaft diameter exceeds requirements.

Which of the following transmission gear ratios reduces transmission output shaft speed the most

The gearbox is composed of a shifting transmission mechanism and a shifting operating mechanism. The main function of the variable speed transmission mechanism is to change the value and direction of the torque and speed; which of the following transmission gear ratios reduces transmission output shaft speed the most,the main function of the operating mechanism is to control the transmission mechanism to realize the transformation of the transmission ratio, that is, to realize the shifting to achieve the variable speed torque.which of the following transmission gear ratios reduces transmission output shaft speed the most

The simple transmission has the advantages of high efficiency, simple structure and convenient use, but the number of gears is small, and the range of i change is small (traction force and speed range are small), which of the following transmission gear ratios reduces transmission output shaft speed the most,and it is only suitable for some turners with few gears. If the range of i is increased, the size of the transmission is increased, and the shaft span is increased. In order to increase the number of steps without making the shaft span too large, a component type transmission can be used.which of the following transmission gear ratios reduces transmission output shaft speed the most. The so-called component transmission is usually composed of two simple transmissions,which of the following transmission gear ratios reduces transmission output shaft speed the most, wherein the number of gears is called the main transmission, and the less is called the auxiliary transmission.


The mechanical gearbox mainly uses the principle of gear reduction. which of the following transmission gear ratios reduces transmission output shaft speed the most.To put it simply, there are multiple sets of gear pairs in the gearbox, and the shifting behavior when the car is running, that is, the different gear pairs in the gearbox are operated by the operating mechanism. For example, at low speeds, let the gear ratio work with a larger gear pair, and at high speeds, let the gear ratio work with a smaller gear pair.

which of the following transmission gear ratios reduces transmission output shaft speed the most
1. Accelerated deceleration, which is often referred to as the variable speed gearbox.
2. Change the direction of the drive. For example, we use two sector gears to transmit the force vertically to the other.
3. Change the turning moment. Under the same power condition, the faster the speed turns, the smaller the torque the shaft receives, and vice versa.
4. Clutch function: We can separate the engine from the load by separating the two originally meshed gears, such as brake clutch.
5. Distribute the power. For example, we can use one engine to drive multiple slave shafts through the gearbox main shaft, thus realizing the function of one engine to drive multiple loads.

Continue reading

Why is backlash required between meshing gears

why is backlash required between meshing gears.Engagement refers to a transmission relationship between two mechanical parts, called an engagement drive. Gear transmission is the most typical meshing transmission and is the most widely used form of transmission. why is backlash required between meshing gears.According to the different transmission principle, there are spur gear meshing transmission and helical gear meshing transmission.


Gear meshing transmission has the characteristics of large adaptability range, high transmission efficiency, long working life, stable transmission, high reliability, constant instantaneous transmission ratio, and can realize various position requirements. It is used in modern mechanical transmission. Very extensive. why is backlash required between meshing gears.It consists of a drive gear, a driven gear and a frame. Through the meshing action of the gears, the movement and power of the driving wheel (shaft) are transmitted to the driven (shaft), and the required rotational speed and torque are obtained.

why is backlash required between meshing gears
(1) Advantages: It can adapt to a wide range of speed and power transmission. Its peripheral speed can be from very low to as high as 300m / s; high transmission efficiency, long working life, smooth transmission, high reliability; can ensure a constant instantaneous transmission ratio;why is backlash required between meshing gears, can achieve two-axis transmission of various position requirements.
(2) Disadvantages: The two wheels must be in contact, so it is not suitable for transmissions with large distance between shafts; the precision for manufacturing and installation is high, otherwise large noise will be generated.

Continue reading

The electric motor gear reduction calculator

The electric motor gear reduction calculator

1. The geared motor is manufactured in accordance with international technical requirements and has a high technological content.
2. Compact structure, reliable and durable, with high overload capacity and high power.
3, low energy consumption, superior performance, reducer efficiency of up to 95%.The electric motor gear reduction calculator.


4, low vibration, low noise, high energy saving, high-quality segment steel material, steel cast iron box, high-end gear reducer motor uses special aluminum alloy die-casting box, the gear surface is subjected to high-frequency heat treatment.The electric motor gear reduction calculator.
5. After precision machining to ensure positioning accuracy, the gear reducer of the gear reducer of the reducer can be configured with all kinds of mainstream motors in the market, forming a new product feature of mechatronics and modular structure, which fully guarantees the quality characteristics of the product.
6. The product adopts serialized and modular design ideas, has wide adaptability, can be combined with various types of motors, installation positions and structural schemes, The electric motor gear reduction calculator and the gear reducer can select any speed and various structural forms according to actual needs.


The electric motor gear reduction calculator Gear reducer features:
1. The gear reduction motor is manufactured according to the technical requirements of the national professional standard ZBJ19004;
2, space saving, reliable and durable, The electric motor gear reduction calculator,with high overload capacity, power up to 95KW or more;
3, low energy consumption, superior performance, the efficiency of the reducer is as high as 95% or more;
4, low vibration, low noise, high energy saving, the selection of high-quality segment steel material, steel cast iron box, the gear surface after high-frequency heat treatment;The electric motor gear reduction calculator.
5, through precision machining to ensure positioning accuracy, all of which constitute the gear transmission assembly gear reduction motor is equipped with various types of motors, forming a mechanical and electrical integration, fully guarantee the quality characteristics of the product;
6, the product uses a series of, modular design ideas, has a wide range of adaptability, this series of products have a large number of motor assembly installation, installation location and structural solutions, you can choose any speed and various structural forms according to actual needs.


The electric motor gear reduction calculator is widely used, and it is an indispensable power transmission equipment for automatic mechanical equipment, especially in printing machinery, corrugated machinery, packaging machinery, conveying machinery, food machinery, color box machinery, automatic storage, three-dimensional warehouse, three-dimensional parking.The electric motor gear reduction calculator Field equipment, textile, dyeing and finishing, chemical and other equipment.

Continue reading

How does an electric motor work physics

An electric motor is a rotary electric machine that converts electrical energy into mechanical energy.How does an electric motor work physics. It mainly consists of an electromagnet winding or distributed stator winding for generating a magnetic field and a rotating armature or rotor. How does an electric motor work physics.Under the action of the rotating magnetic field of the stator winding, it has a current passing through the effective side of the stator winding and is rotated by the action of the magnetic field.

According to the principle of motor reversibility, if the motor does not change its structure, the motor is used as a motor and can also be used as a generator.How does an electric motor work physics. It is a machine that converts electrical energy into mechanical energy. Usually, the work part of the motor is rotated. This type of motor is called a rotor motor.How does an electric motor work physics. It is also called a linear motor.
The most widely used of various motors is an AC asynchronous motor (also known as an induction motor).How does an electric motor work physics. It is easy to use, reliable in operation, low in price, and firm in structure, but with low power factor and difficult speed regulation. Synchronous motors are commonly used in high-capacity, low-speed power machines (see Synchronous Motors).How does an electric motor work physics. The synchronous motor not only has a high power factor, but its speed is independent of the load and is determined only by the grid frequency.

The work is more stable. DC motors are often used where wide-range speed regulation is required.How does an electric motor work physics. However, it has a commutator, which is complicated in structure, expensive, difficult to maintain, and unsuitable for harsh environments. How does an electric motor work physics.After the 1970s, with the development of power electronics technology, the speed control technology of AC motors has gradually matured, and the price of equipment has been decreasing, and it has begun to be applied.

Continue reading

The list of gearbox manufacturing companies

(1) Drive gear and driven gear.  The list of gearbox manufacturing companies.The input shaft can be understood as being connected to the clutch and rotating under the driving of the engine. The gear fixed on the input shaft rotates synchronously. The gear is called the driving gear, and the gear connected to the output shaft is forced to rotate. This gear is called a driven gear.
(2) Transmission ratio i. The list of gearbox manufacturing companies.The ratio of the number of teeth of the driven gear to the number of teeth of the driving gear is defined as the gear ratio.


When the relationship between the number of teeth of the driven gear and the number of teeth of the driving gear changes, the transmission ratio i changes, and under the condition that the engine speed does not change, the output shaft speed change, that is, the wheel speed changes. The list of gearbox manufacturing companies.A pair of intermeshing gears does not change in the number of teeth used, so its gear ratio is fixed. If a plurality of gears of different numbers of teeth are mounted on the input shaft and the corresponding number of teeth on the output shaft is also a variable gear meshing, a set of stepped transmissions having different gear ratios i can be obtained.The list of gearbox manufacturing companies. The car transmission is based on this basic principle to achieve shifting shifting.
(3) Forward gear, a gear that can drive the car forward. Reverse gear, which can make the car reverse the driving position. In the neutral position, the gears in the transmission are not in the working position. The list of gearbox manufacturing companies.At this time, after the engine power is input to the input shaft, it is no longer transmitted to the output shaft.
(4) Direct file. The engine power is transmitted through any gear in the transmission, but the gear output directly through the transmission input shaft and the output shaft directly connected thereto is called direct gear.The list of gearbox manufacturing companies. The direct gear ratio is 1.


(5) Overspeed gear. That is, the output shaft speed is higher than the input shaft speed.
(6) Number of files. Refers to the number of gear positions in a stepped gear transmission. The number of gears in common gear transmissions is four to five, and the three-speed transmission is rare. The list of gearbox manufacturing companies.The more the number of gears, the better the car's adaptability to driving conditions, and the lower the fuel consumption, but the more complicated the transmission transmission mechanism and the operating mechanism, the more difficult it is to operate and the higher the cost.
(7) Low grade, high grade. In the gear position of the transmission, the small number of gears is called low gear, the smaller the gear, the larger the gear ratio, the greater the traction, and the lower the speed.The list of gearbox manufacturing companies. For example, the gear ratio of the first gear is the largest in the forward gear, the lowest speed and the highest traction. The digital gear is called high-grade, the larger the number, the smaller the gear ratio, the smaller the traction, but the higher the speed.


(8) Shifting. The shifting process of the transmission to complete the gear ratio is called shifting. The list of gearbox manufacturing companies.The shifting of the sleeve is performed by integrating with the gear, and the engaging ring ring on the flank and the engaging sleeve are engaged (or separated) to realize a gear ratio change called a sleeve shift. The synchronizer shifts and uses the synchronizer to shift gears. The list of gearbox manufacturing companies.The shifting not only has no impact and noise on the engaging teeth but also a short shifting time.
(9) Jumping. The list of gearbox manufacturing companies.During the running of the car, due to the wear and vibration of the engaging teeth, the clutch sleeve and the engaging ring gear are separated to make the transmission in a neutral state.

Continue reading

The difference between single stage and two stage gearbox

The difference between single stage and two stage gearbox

1, structurally different

The three-axle transmission has three shafts, and the two-shaft transmission has two shafts; the input shaft and the output shaft of the two-shaft transmission are not on the same axis, and the two shafts are the first shaft (input shaft) and the second shaft (output) axis).

The first axis is the driven shaft of the clutch, the second shaft is the main shaft of the main reducer, and the single-stage shifting is used by the car due to its small size. The difference between single stage and two stage gearbox.Unlike the two-shaft transmission, the input shaft and the output shaft of the three-shaft transmission are on the same axis, one more intermediate shaft than the two-shaft transmission, and is a two-stage shift. Due to the large torque generated, the body is large and mostly used by heavy-duty vehicles.

Continue reading

The design and analysis of a two stage reduction gearbox

The external gear of the wind power gear box generally adopts a carburizing and quenching grinding process. The design and analysis of a two stage reduction gearbox.The introduction of high-efficiency and high-precision CNC forming gear grinding machines has made our foreign gear finishing level not much different from that of foreign countries. There is no difficulty in achieving the 5-level precision technology specified by the 19073 standard and the 6006 standard. The design and analysis of a two stage reduction gearbox. However, there are still gaps between China's advanced technology in heat treatment deformation control, effective layer depth control, tooth surface grinding tempering control, and gear tooth shaping technology.


Due to the large size of the ring gear of the wind turbine gearbox and the high processing precision,  The design and analysis of a two stage reduction gearbox.the manufacturing technology of the inner ring gear in China is quite different from the international advanced level, which is mainly reflected in the gear processing and heat treatment deformation control of the helical internal gear.


The machining accuracy of the structural parts such as the box body, the planet carrier and the input shaft has a very important influence on the meshing quality of the gear transmission and the bearing life.  The design and analysis of a two stage reduction gearbox.The quality of the assembly also determines the length of the wind turbine gearbox and the reliability. . China has realized from the importance of the processing and assembly precision of structural parts that there is a certain gap between the level of equipment and the advanced level of foreign countries.  The design and analysis of a two stage reduction gearbox.The acquisition of high-quality, high-reliability wind turbine gearboxes, in addition to advanced design techniques and necessary manufacturing equipment support, is inseparable from the strict quality control of every step of the manufacturing process.  The design and analysis of a two stage reduction gearbox.The 6006 standard provides strict and detailed regulations on the quality assurance of the gearbox.


The lubrication system of the gearbox is very important for the normal operation of the gearbox.  The design and analysis of a two stage reduction gearbox.The large wind turbine gearbox must be equipped with a reliable forced lubrication system to inject the oil to the gear meshing area and bearings.  The design and analysis of a two stage reduction gearbox.In the cause of the failure of the gearbox, the lack of lubrication accounted for more than half.  The design and analysis of a two stage reduction gearbox.Lubricating oil temperature is related to component fatigue and overall system life. Generally speaking, the maximum oil temperature of the gearbox should not exceed 80 °C during normal operation, and the temperature difference between different bearings should not exceed 15 °C. The design and analysis of a two stage reduction gearbox.When the oil temperature is higher than 65 °C, the cooling system starts to work; when the oil temperature is lower than 10 °C, the oil should be heated to the predetermined temperature and then turned on.

Continue reading

The dc geared motor manufacturer in india

The DC geared motor, that is, the geared motor, is based on the ordinary DC motor and is equipped with a gear reducer. The role of the gear reducer is to provide a lower speed and a larger torque. The dc geared motor manufacturer in india.At the same time, the different reduction ratios of the gearbox can provide different speeds and torques. This greatly increases the use of DC motors in the automation industry. The dc geared motor manufacturer in india.The geared motor is an integrated body of the reducer and the motor (motor). Such an integrated body is also commonly referred to as a gear motor or a geared motor.

It is usually assembled and assembled by a professional reducer manufacturer. The dc geared motor manufacturer in india.Geared motors are widely used in the steel industry and machinery industry. The advantage of using a geared motor is to simplify the design and save space.


DC geared motors are relatively common micro geared motors in the electromechanical industry, but at present, there is not much knowledge about the performance and materials of geared motors and how to choose materials for manufacturers.The dc geared motor manufacturer in india. It is not a matter of one or two days,The dc geared motor manufacturer in india. mainly from Considering the nature of the magnetic field, consider the directionality and uniformity of the magnetic permeability of the various gear reduction motor cores, cold rolling, considering the magnetic density of the working core of the geared motor, The dc geared motor manufacturer in india.considering the core loss and other aspects, but for foreign high The technical content of the reducer on the choice of material structure design, understanding is not deep, so the above are some knowledge of domestic DC geared motors.

Continue reading

How to reduce motor speed with gears

The reduction gear motor, also known as the gear reduction motor or the reduction motor, is a motor-driven closed transmission gear reduction device. How to reduce motor speed with gears.The reduction transmission mechanism for integrated assembly of the motor and the gear box is used to reduce the rotational speed and increase the torque to meet the mechanical equipment work.How to reduce motor speed with gears. need.How to reduce motor speed with gears. Gear motor products have the characteristics of "small size, large torque, low noise", which is the lifeblood of automation and the selection of transmission machinery enterprises.


Reducer gear motors are mainly used in products that have been widely used in heavy machinery, electronic equipment, office automation, production automation, financial machinery, crushing equipment, sand making machinery, vibrating screens, sand washing machines, conveying machinery, drying equipment, medical machinery.

How to reduce motor speed with gears.Tobacco machinery,How to reduce motor speed with gears. mining equipment, hydraulic equipment, CNC machine tools, metal forming equipment, processing equipment, belt feeders, belt conveyors, industrial mills, How to reduce motor speed with gears.stone production line equipment, sand production line equipment, printing machinery, packaging machinery , textile machinery, food machinery, feed equipment, chemical equipment, industrial automatic control systems and equipment, packaging and molding equipment, three-dimensional garage, precision photoelectric control and other modern industrial gear motors have a high technological content.How to reduce motor speed with gears. Space saving, reliable and durable.


How to reduce motor speed with gears.Use of reduction gear motor
1. Reduce the speed.
The speed of the motor is passed through the reduction gearbox to achieve the required speed, which is often referred to as the output speed.
2. Increase the torque.
Under the same power conditions, the slower the output speed of the geared motor, the greater the torque, and vice versa.
3. Change the direction of the drive,
For example, we use two sector gears to transfer the force vertically to the other axis of rotation.
4. Clutch function:
We can achieve the purpose of power-off instant braking by adding a brake clutch.

Continue reading

2015 China International Machinery Industry Exhibition

The 16th 2015 China International Machinery Industry Exhibition will be held in Ningbo international exhibition center on March 19, 2015. Ningbo application of industrial robots BBS. and participants will be from China, the United States, Germany, Switzerland, Japan and other 14 countries and regions, more than 400 exhibitors. 

How to increase torque of dc motor using gears

How to increase torque of dc motor using gears How to increase torque of dc motor using gears

The decelerating DC motor, also known as the gear reduction motor, is composed of a reducer plus a DC motor. The function of the reduction gearbox is to provide a lower speed and a higher torque, and different speed reduction ratios of the gearbox can provide different speeds and moments. How to increase torque of dc motor using gears.This greatly improves the application of the decelerating DC motor in various fields.


 The decelerating DC motor is a separate component consisting of a gear transmission, a worm drive, and a gear-worm drive enclosed in a rigid housing.How to increase torque of dc motor using gears. It is often used as a reduction gear between the prime mover and the work machine, in the prime mover and the working machine. How to increase torque of dc motor using gears.Or the effect of matching the speed and transmitting torque between the actuators.

The decelerating DC motor is generally used for low-speed and high-torque transmission equipment.How to increase torque of dc motor using gears. The basic working principle is that the motor and the high-speed running power can be decelerated by the gears on the input shaft of the reducer that mesh with the large gears on the output shaft. How to increase torque of dc motor using gears.Purpose, the ordinary reducer will also have several pairs of identical principle gears to achieve the desired deceleration effect, the ratio of the number of teeth of the large and small gears, is the transmission ratio.

        The main functions of the decelerating DC motor are as follows:

Continue reading

Contact Us Now!

NER GROUP CO.,LIMITED

Yantai Bonway Manufacturer Co., Ltd

Tel:+86-535-6330966

Mobile:+86-18563806647

Whatsapp/Wechat: 008618563806647

https://twitter.com/gearboxmotor

https://www.facebook.com/sogears1993

https://www.youtube.com/c/Gearmotors

E-mail:inquiry@sogears.com; Skype ID: qingdao411

Industrial gearbox manufacturer in China

As a Industrial gearbox manufacturer in China, We offer the international standard high quality gear speed reducer and reduction gearbox who has the big stock house to guarantee the prompt delivery Depending on the professional industry field solution, excellent industry field achievement and the leading technology application in Hoist&Crane, Sugar&Paper, Coal&Mining, Rubber&Plastic, Packing&Conveyors, Energy&Fans&Pumps, Cement&Construction, Sawmills&Wood Mills, Food&Butchering&Pharma, Chemical&Boilers&Ceramic, Recycling&Sewage disposal, Steel&Rolling Mill&Metallurgy, Textile&Ginning&Leather working and so on.